Projects

Our Projects

Latest Work

Replacement Parking Sensor Cover

A small van’s rear parking sensor cover was damaged. Replacing the whole unit through an authorised service centre would have cost considerably more, so the owner chose a 3D printed replacement part.

The cover was made from ASA, a UV-resistant material suitable for automotive use.

The work involved 3D scanning, CAD modelling and 3D printing the new part.

Replacement Car Remote Housing

The original remote housing was damaged, but its circuit board still worked. A new remote would have cost approximately CZK 65,000, so the customer chose a replacement housing.

We designed and made three replacement housings from PC (polycarbonate), which offers high strength and heat resistance.

We reverse engineered the original part and optimised the CAD model for 3D printing.

Lamp Bracket Repair

The original lamp bracket was damaged. Its simple geometry allowed us to model and 3D print a replacement.

A heat-set brass insert provides the original M5 thread with a strong, durable connection.

The bracket was made from PC (polycarbonate) for its mechanical strength and heat resistance.

Car Air Conditioning Repair

The air conditioning housing was damaged. Replacing the complete unit would have cost around CZK 10,000; repairing it cost under CZK 1,000.

The replacement part was made from ASA, a UV-resistant material suitable for automotive use.

The repair involved 3D scanning, CAD modelling and 3D printing a replacement component.

Replacement Rear Roof Corner Covers for a Caravan

The original covers were damaged and no longer available. Each part was over 500 mm long, so we printed it in two sections and joined them with interlocking features and adhesive.

We chose ASA, a material with good strength, heat resistance and UV resistance.

Replacement Gear Selector Cover for a Wheelchair

The wheelchair’s gear selector cover was damaged and a replacement was no longer available because the model had been discontinued. We made a new cover for the customer.

We chose PP-CF (carbon-fibre-filled polypropylene), chosen for its heat resistance, strength, impact toughness and UV resistance.

We scanned the original, created an accurate CAD model and 3D printed the cover. We then checked its dimensions against the original to ensure it fitted.